Recognizing The Right Roofing

4 Roof Improvements for Vents & Underlayment to Prevent Problems with Rot & Wear

There are a lot of different things that can damage the roof of your home. Some of these problems have to do with leaks, but they can also be caused by condensation and problems with moisture. To prevent these problems, you want to have the right combination of moisture barrier underlayment and ventilation improvements. The following tips will help you choose the right vent and underlayment improvements to prevent wear and rot under roofing: 

Fixing Water Traps and Reinforcing Flashing with Additional Underlayment

On many roofs, water traps can be a problem and cause excessive wear. If you are planning on installing slate roofing, you want to correct any problems with the water traps and runoffs to ensure these vulnerable areas do not develop leaks that cause moisture problems and damage to your home.  

Adding Synthetic and Rubber Underlayment to Replace Asphalt Felt Paper  

When installing materials like slate, it is important that the materials have a good underlayment, which should consist of plywood and a moisture barrier. Typically, roofs use felt paper as a moisture barrier, but if you want to prevent damage to your roof due to leaks and moisture problems, you may want to consider using a rubber underlayment. Rubber underlayment is a great option for metal, slate and synthetic roofing products that may be more prone to minor leaks.  

Choosing the Right Combination of Vents in Soffits and Ridge Vents

If you want to use ridge vents for the roof of your home, you will want to make sure that there is equal ventilation at the eaves. Therefore, it is important to also have vents installed on the soffit of eaves. This allows the air to flow freely through the attic for heat and moisture to escape. In addition, there are also options for larger vents that can be installed in inconspicuous locations if the eaves and ridge vents do not provide enough ventilation.  

Using Better Turtle-Back Vents

Often, the ridge vents that are used with modern roofs do not offer sufficient ventilation. Therefore, you will want to consider using turtle-back vents, which are the larger vents that you see on roofs. These vents do better at providing ventilation and preventing problems with moisture. Locate the turtle-back roof vents in areas that are inconspicuous, such as on the back of your home and other areas that are less visible.  

These are some tips that will help with the underlayment and vent improvements for your root to prevent rot and wear. If you need help with improvements to your new slate roof, contact a slate roofing company like Three Rivers Roofing and talk to them about these improvements.  


Share